(((Color)))

Smart Upscaler [up to 4Megapixels] (FLUX1.D)
APP|Image

4.4

This AI-app designed to restore, upscale and color fix low resolution realistic images and portraits (blurry and non-blurry aswell) using FLUX.1 models.Important Usage notes:1) Time generation will drastically depend on what values you put in "Input Image Resizer" and "Image Upscale_by". Sometimes even up to 3-4 minutes - be patient!2) [In square brackets is recommended value ranges] - by default any image you load (even 256x256 image) will be resized to match 1Megapixel, which is base resolution for FLUX.1 model. This setting can be altered in - "Image Input Resizer [0.8Mp-1Mp]" graph. After that, this resized image will be upscaled by whichever value you have in "Image Upscale_by".3) Prompt is not mandatory, but can help if you get unstable results, as well as denoise values.4)If you already have good quality non-blurry image with resolution around 1Megapixel or higher as an input image, you can skip "restoration" step by lowering denoise value as low as [0.01], BUT also make sure that you match your resolution with "Input Image Resizer" value, if input resolution is higher than 1Mp, otherwise image will be downscaled. This way you'll get clean upscale without image restoration step, avoiding possible oversharpening. 5)You can still use value "Image Upscale_by = 1", in that case upscaler will act as an image refiner.6)Film grain value is set to [0.02] by default and reference images were made with this value and siax200 upscaler, you might want to change this value depending on upscaler model you are using or if your images are too "grainy".
nxssar
Video Combination v12.05c
APP|Video

4.8

🟩FPS自動調整に変更しました v12.05c (2026.01.05) 2つの動画のFPSレート調整してから結合アプリを使うという手間が面倒過ぎるという事で、最初から指定FPSに両方の動画を合わせて結合します。再生時間は維持です。24か30が妥当と思います。 🟩2つの動画と音声を結合する機能 【前編の末尾カット機能を追加】(2025.12.20) 前編のラストフレーム付近をカットしながら結合する事が出来ます。 【削除ON/OFFスイッチ廃止】(2025.01.05) カットする場合はカットする枚数を指定してください。 -1 を指定するとカット機能がOFFになります。 0 はおそらくSeaArt仕様でエラーなので削除機能を使わない場合は必ずマイナス値にしてください。 (マイナス値にすると内部的には0枚カットで動作します) これにより継ぎ目の2コマ被りを無くしたり、継ぎ目を前編の任意の位置にする事ができます。例えば後ろから15フレーム前の画像をベースに後編動画を生成した場合はカット数を15にすれば被りなく綺麗につながります。 音声がある場合は前編の音声トラックも同比率で少し切りますので、後編の音声がずれる事もないはずです。 後編を作る為に任意のフレーム画像を取り出す方法は 動画複製(正・逆再生) と任意フレーム抽出 v25.21b (ワークフロー) 動画複製・フレーム抽出 または 動画の任意コマ画像を切抜き (アプリ) 動画の任意コマ画像を切抜き こちら等で可能です。 【画像サイズ】 仕上がりはVideo1の縦横サイズ / アスペクト比になります。 Video2がサイズ違いでもアスペクト比が同じ場合は単なる拡大縮小だけになりますが、アスペクト比が違う場合は余白が無い状態でになる様にアジャストされて余分カットのトになります。 (同じサイズだけ想定していたので説明忘れてました😅) 同じサイズを結合する事を推奨します。 【音声】 2つの動画と音声がそのまま結合されます。 また音声をOFFにして結合する事も可能です。 (トグルスイッチ:グレーアウトがOFF、 色付きがON) ※ただし音声トラックがない動画を使う場合は必ずその動画の音声スイッチを オフ にしてください。音声トラックがない動画をオンで結合しようとするとエラーになります。 【音声OFFでの作成 = 無音トラックに無音の音声あり】 音声OFFにすると動画と同じ長さの無音トラックを書き込みます。 従って仕上がったものは音は出ないですが、音声トラックありになります。 【FPS】 2つの動画のFPSの違いを指定FPSで自動調整して結合する方法に変更しました。 SeaArtは24や30が多いと思うのでどちらかでOKと思います。
Rex.